Comments
-
I agree that this is getting out of control. I have over 27k attempts in the past 3 hours alone. This is definitely impacting our network…It is aggravating that there isn't a security option to block IP automatically to protect against this brute force attack attempts. I enabled MFA a long time ago so thats a saving grace…
-
After reading more about this I believe I understand. Not a network guru when it comes to firewalls so I appreciate the help.
-
Good day @MustafaA , Is there any documentation on the second option you have stated or could you point me into the right direction? We are a 1 man IT shop with limited network background as we are a small company. I have a similar scenario but using the Tunnel All mode creates a major impact on network performance that I…
-
I do find it ridiculous that there is a lack of documentation for this process when the upgrade calls for deploying a new VM in Azure without any guidance. We are a small company and lack the man hours and experience on an Azure level to implement this in a timely manner. Upgrading our On-Prem to 7.1 is causing site to…
-
@MustafaA I have been on a support call with Sonicwall for the past 2 hours+ and still cannot get this resolved. {"customHtml":{"htmlTemplate":"<code><div>Resource /subscriptions/XXXXXXXXXXXX-a3415c459ab8/resourceGroups/NSV/providers/Microsoft.Network/virtualNetworks/NameNetwork/subnets/LAN-X0 referenced by resource…
-
@Alejandro_Santillan Can you provide the steps you took to deploy the new NSv? I cannot find any documentation on how to perform this upgrade in Azure and it is something I need done asap. I have the same issue when using the Marketplace and need to put it on the same network in Azure as our current NSv 7.0 is located.…
-
@preston I tried that as well Perhaps I dont have my CFS Exclusion/Inclusion set correctly as the term in confusing me.... Does the Exclude mean dont allow or is it the include mean dont allow these types?
-
@preston Thanks for the information! I was able to fix a couple of things going that route but one last question if you could help. How do I block sites with https? Example: disneyplus.com, even though it is on my blacklist, I can still access that site.
-
@preston, Didnt know I could paste in here, thanks for the TIP! I am using Edge/Chrome during my tests and I finished up setting the DPI-SSL which was deployed to all my machines via GPO. I finally see hit counters and most sites are being blocked. However, even though I have DPI-SSL enabled users on can still access HTTPS…
-
@TKWITS I have read the SonicWave 231c get started guide and the administration guide. They didnt provide clear instructions on how to configure guest wifi with 0 access to the my internal network. I will review again as I started this process yesterday.
-
I read the first one and after checking the 2nd article these all point to the firewalls itself. I do not have an TZ370W, it is non wireless so I do not think this applies to me. Am I missing something?
-
WOW they do not make things clear in their documentation...I am trying to setup RADIUS authentication and authorization with the 2540 but once again their documentation is very cryptic to me. When I research the configuration setup it keeps referencing Clearpass. Is this required?
-
For the Access SW they are Aruba 2540 and 2930 for Core switch connecing to SonicWall TZ370 and Domain B will be a TZ270. Domain A has managed switches Domain B has unmanaged switches
-
@preston I appreciate your efforts but I was able to finally get this resolved. Somehow I missed adding the cloud network into the VPN group...I am seriously smacking myself for that...
-
@preston Excuse my ignorance as I only been working with firewalls for 3 years and I just implemented the SonicWall Security Appliances, Cisco ASA was prior to them. What do you mean it needs to be added to the destinations? I am using a Site to Site policy, not the Tunnel Interface. I have the following setup: Address…